How to use the spring machine？
2. Measuring tools, instruments and tools should not be placed on the machine to avoid accidents during operation. During the operation, pay attention to whether the machine runs smoothly, without noise or abnormal vibration, and try not to overload the equipment for a long time.
3. During the operation of the spring machine, it is forbidden to touch the body panel with your hands. After the spring product is processed and cut on the machine, you must control the direction in which the product falls, so as to avoid the jamming of the knife seat and the phenomenon of collision. In addition, when the spring product processed by the spring machine is abnormal, it must be properly trimmed after the machine is stopped to avoid safety accidents.
4. When the novice operates and debugs the computer spring machine, it must be completed in the company of a professional master, so as to reduce or avoid unnecessary safety accidents. Moreover, after the novice apprentice or the machine is debugged, the technician must check it, so as to avoid errors that cause the equipment to run incorrectly.
5. When the equipment fails, it is strictly forbidden for non-professionals to disassemble the spring machine without authorization, so as to avoid secondary damage to the spring machine equipment. In case of equipment failure that cannot be handled, feedback should be given to the manufacturer in a timely manner, and professional personnel will conduct inspection and maintenance. Daily reasonable operation and maintenance can not only improve production efficiency, but also reduce the failure rate of the machine or damage to the body, so that the spring machine can maintain a longer service life.