What Kind Of Maintenance Should Be Done On The Wire spring machine
The wire spring machine is a high-precision spring processing equipment. Daily maintenance of the equipment is required to ensure the machining accuracy of the wire spring machine and prolong the service life of the machine. The wire spring machine must do the daily maintenance ?
In order to reduce the wear rate of spring mechanical components, eliminate long-term failures, and extend the service life of the machine, the daily maintenance of the spring machine mainly focuses on cleaning, tightening, adjustment, lubrication, and corrosion prevention. The following work is required:
Maintenance of operating organization:
After the equipment is used up, turn off the power of the machine, wipe the dirt on the surface of the mechanism and the motor with cotton fabric and apply anti-rust oil. To prevent dust and debris from falling in, do not use an air spray gun to blow, and leave a gap in the chute or rotating structure. The moving parts of the sliding block of the spring machine must be lubricated with lubricating oil, and high-viscosity grease is not allowed, so as not to affect the linear movement of the sliding block. In order to prevent dust and debris from falling in, do not use an air spray gun to blow, and keep the gap between the chute or the rotating structure. In addition, the grease nipple is added to the bearing grease 1 to 2 times a month.
Lubrication and maintenance of gear transmission:
The new machine has been running for more than 1000 hours or about half a year, please be sure to replace with new circulating oil. The gears of the Y-axis of the spring machine are traditionally encapsulated in the wire feed box. In daily life, we must regularly check whether there is enough special gear grease between the gears in the wire feed box to ensure that the gears have sufficient lubrication protection during transmission. Effectively avoid the occurrence of tooth grinding or tooth burning!
Maintenance of wire feeding system:
The surfaces of the servo motor and encoder of the feed mechanism should be cleaned regularly to prevent dust from falling into the machine and causing damage to the mechanical parts. Always check and clean the iron filings on the wire feeding box to prevent iron filings from falling into the gear transmission during the operation of the machine body, which may cause tooth grinding or tooth burning, which can effectively maintain the wire feeding accuracy of the equipment!
In addition to the above-mentioned daily maintenance operations, we must also pay attention to the sanitary cleaning and tool placement of the machine. Reasonable maintenance can make the wire spring machine be used normally for a longer time. Dongguan Aoiling CNC can provide more options to the spring Industry.